Fanvil BW320, Руководство пользователя

Страница: 15 / 53

15
3.2.5. Phonebook prefix function
At standby mode, press phonebook button, user can not only select his needed
number to call out but also he can add prefix to numbers, then call out. It is convenient for
user add prefix numbers that PBX need.
3.2.6. Function key
If function key is set as SIP Line key, user can select which lines will be used to make call
when dialing or make a 2nd dialing by this function key. Note that only the key which is
registered is available to be select to call.
This function key can be configured as “Key Event”, namely set as F_MWI. It can set relative
keys as Voice mail key, can check new and old voice mail; also can be set other function
keys like the following table:
Field Name Explanation
F_PBOOK Like the phonebook key.
F_REDIAL Like the redial key.
F_A_TRANSFER
or
F_B_TRANSFER Like the transfer key.
F_PICKUP Pickup function
F_JOIN Join call function.
F_AUTOREDIAL Auto redials function.
F_UNAUTOREDIA
L Cancel redial function.
F_DND Do not disturb function.
F_MWI MWI (message waiting indication) function.
F_CFWD Call forward function.
F_CALLERS Like the Callers key.
F_MEMO Like the Memo key.
F_REC Record function (record on server).
User can implement BLF/PRESENCE/MWI/SPEED DIAL features by Memory Key.
z
/b Busy Lamp Field: Based on Asterisk, it can be used to check the status (Idle, ring,
busy) of the pointed phones. It is helpful to operator to know the status of the phone
which he will switch to.
User can configure the BLF like: 300 is rogatory number, @1 means SIP1, of course, user
can configure as @2(SIP2); if don’t use this, simply says 300/b, it will use SIP1 as default. /b
means use BLF feature.
When this configuration enable, the phone will subscribe the status of pointed phone each
60s: LED off means Idled, LED flash means ring and LED on means busy.
z
/m MWI (Message waiting indication), means the number of this key is the number of
voicemail
User can configure MWI function according to the above chart: 8000 is mailbox number, @1
is using SIP1, user also can configure @2(SIP2),the rest lines can be deduced by analogy, if
no use, is 8000/m,it will pass the SIP1 line in default,/m means MIW function is using.
If there’s new voicemail, LED will blink and shows new message, after receiving, server will
send current mail info to phone, after receiving new MWI order, LED will respond, if LED
light is off, it means no new voicemail.
z
/p Presence means phone can check the status of other phone that has relevant
numbers.
User can configures presence function according to the above chart: 500 is number that