Part No.INST-EIE150
07/07
Ezifit In-Wall
Exhaust Fan
CONTENTS & INSTALLATION INSTRUCTIONS
Contents:
Ezifit
Fan
EIE150 1
off.
Installation
Instruction
1
off.
Fixing
screws
kit 1
off.
Also available on request:
Part Number
Flexible duct 150 dia. x 6m long
DUCT150-6M
Internal
ceiling
exhaust
grille
RCG150
Duct
Joiners
JOINER150
Y
Piece
YP-150-150-150
Three
Speed
Switch
DSS1-16
Inspection:
Ensure the unit has arrived in good condition and that the impeller will spin freely
Installation:
1. Installation of this product should be carried out by appropriately qualified persons.
2. Determine position of fan on wall.
3. Prepare opening in wall 265mm high x 240mm wide.
4. Remove grille from fan by un-doing the grille retaining screw.
5. Position the fan in the opening with the retaining screw hole uppermost.
6. Use fan for template to mark and drill holes for fasteners provided.
7. Plug fan lead into supply. Fan will require a switch to be wired to an accessible area for the fan
operation.
8. Fix fan to wall with fasteners provided.
9. Test run the fan to ensure free rotation.
10. Refit grille and grille retaining screw.
