EN_FANOXTD_GUIDE_SIL_OCEFPrimaryDist_SILA_R002.doc 22 / 36
7.3.
Menus
7.3.1. Measurements menu
The information in SIA-C relay is organized through the
following menus:
Measurements
States
Settings
Events
Counters
Commands
LDP
Fault Report
From standby screen pres
s “OK” key to access to the
fist menu
“MEASUREMENTS” and press “▼” key to
overview the rest of the menus in the relay
To return to standby scr
een, press “C” key.
It is also possible to access to Fault reports by pressing
“◄” key.
From the standby mode screen, press the
“OK” key to access the first line of menus.
Use the “▲” and “▼” keys to position the
cursor over the “MEASUREMENTS” screen
a
nd press “OK”.
Use the “▲” and “▼” keys to position the
cursor over the measurement and to see its
value.
Press
the “C” key to return to the standby
mode screen.
(*) Depending on model