www.fanox.com
Installation_Guide_SIAB000B0010AA_Rev. 03 22 / 32
7.3.4. Events menu
How to delete the events
7.3.5. Fault reports menu
How to delete the fault reports
From the standby mode screen, press the “OK” key to
access the first line of menus. Use the “▲” and “▼” keys
to position the cursor over the “EVENTS” screen and the
number of events in the buffer will be displayed. Press
"OK" and use the “▲” and “▼” keys to position the
cursor over the events.
The “┘” and “┐” shows the event has been caused by
the activation or reset.
Each event contains the following information:
Date-time; Description of the event
Size of the events buffer; Position of the event
within the list
Caused by activation or reset; Associated
measurement
To delete the events from the relay it is necessary to
insert the password 5555 from the events menu.
After the erasing of the events it will be appear there is 1
event corresponding to “Events erased
”
NOTE
: When the events are deleted, the fault reports
persist in the relay to analyze the fault situation until
these faults reports are deleted consciously by the user.
From the standby mode screen, press the “OK” key to
access the first line
of menus. Use the “▲” and “▼” keys
to position the cursor over the “FAULT REPORT” screen.
Press "OK" and use the “▲” and “▼” keys to position the
cursor over the faults.
Once it is accessed to a fault report, press “OK”, to
visualize the cause which has originated the fault report.
Pressing “OK” again it is accessed to the registered
events that are related with that fault report. The first
event is the activation of the fault report. To visualize the
rest events use “▼” key.
To delete the fault reports from the relay it is necessary to
insert the password 5555 from the fault report menu.