www.fanox.com
Installation_Guide_SIAB000B0010AA_Rev. 03 18 / 32
7.3.2. States menu
7.3.3. Settings menu
From the standby mode screen, press the “OK” key to
access the first line of menus.
Use the “▲” and “▼” keys to position the cursor over
the “SETTINGS” screen and press “OK”. This takes
you to the settings groups
’ line.
Use the “▲” and “▼” keys to position the cursor over a
settings group, and press the “OK” key to access the
settings that belong to this group.
Use the “▲” and “▼” keys to move through the
different settings. The information that appears
underneath the setting name is its value.
States menu indicates the stuses of the relay (activated
or deactivated) at real time.
From the standby mode screen, press the “OK” key to
access the first line of menus.
Use t
he “▲” and “▼” keys to position the cursor over
the “STATES” screen and press “OK”. This takes you to
the status groups’ line.
Move the cursor over a group of statuses, and press the
“OK” key to access the statuses that belong to this
group. Use the “▲” and “▼” keys to browse through the
different statuses.
The information shows if each status is active. The
message “>Activated” appears under the name of the
group in the status group menus if any of the statuses in
that group are active.
Press the “C” key to return to the standby mode screen.