Fanotec MECHA C1 Скачать руководство пользователя страница 52

Страница: 52 / 122

MECHA User’s Guide

v.06

‒ Single Axis

Presets for MECHA Single

Axis

You can make your own presets or download presets from server. To

download presets from server, on the

Row

page, select the option

More from

server

from the

Presets

list and follow the instructions for downloading.

More from server

option is not in the

Presets

list, then tap the

[Connect to

Wi-Fi]

button, enter the required SSID name and password for a Wi-Fi with

Internet access then, after two beeps, re-load the User Interface. If no beeps

are heard after the MECHA’s LEDs scan up and down, then please try to

connect again and pay attention to the name and password, as they are case

sensitive.
If the Wi-Fi network you connect MECHA to is your regular network you want
to use for MECHA, any time you start MECHA and press

at the splitting

lights, MECHA will be accessible both via phone and local network, provided

that for the local network the Internet is available. As a benefit, MECHA will

also check for any firmware update, if available, and will show a pop-up on

UI to read the news and update, if you want.
Downloaded presets are added to the end of the list, and note their names

start with (s), which means that they are not saved yet.
The presets for MECHA Single Axis available for download, at the moment,

are:

●

4_Shots_Around.mps

●

6_Shots_Around.mps

●

8_Shots_Around.mps

●

10_Shots_Around.mps

●

12_Shots_Around.mps

Let's analyze the

6_Shots_Around.mps

, noting that the description is close

enough for all the others.
This preset is suitable for a single row panorama, 6 shots around, and can be

used in the

(Simple 1) display level.

The level of complexity for the User Interface can be set using the

options available in the select list next to the

[info]

button, at the top of

the

Row

page.

Содержание MECHA C1



























































































































Результаты поиска

Содержание MECHA C1

Отзывы:

Бренды по названию

Популярные бренды

Fanotec MECHA C1, Руководство пользователя

Результаты поиска

Содержание MECHA C1

Отзывы:

Бренды по названию

Популярные бренды