Fanotec MECHA C1 Скачать руководство пользователя страница 50

Страница: 50 / 122

MECHA User’s Guide

v.06

‒ Single Axis

The following four settings have fairly self-explanatory descriptions, and we

just add that the second -

Use „zLM”

- refers to a custom preset, specially

created according to the specifications provided by you.

Technical Details ‒ IP Addresses, FW

Finally, several technical details are displayed, including the firmware

version and the IP addresses at which the User Interface can be accessed:

●

the first is the static address for access from smartphones: 192.168.8.1

●

and the second, which is displayed only when MECHA is in STA mode, is

the dynamic IP for accessing the User Interface on your computer.

Backup and Restore Data

[Backup Data]

button — Creates a download archive that contains all of

MECHA’s settings and files except the firmware.

[Restore Data]

button — Uploads the archive downloaded with the

[Backup

Data]

button.

[Connect to Wi-Fi]

button — Initiates the process of connecting to a Wi-Fi

network to use MECHA in station mode or for firmware update.

[Reboot]

button — Restarts MECHA, similar to restarting a computer.

[Apply]

button — Applies / saves the current settings.

Содержание MECHA C1



























































































































Результаты поиска

Содержание MECHA C1

Отзывы:

Бренды по названию

Популярные бренды

Fanotec MECHA C1, Руководство пользователя

Результаты поиска

Содержание MECHA C1

Отзывы:

Бренды по названию

Популярные бренды