Figure 18
3/16
Ý
-24 x 10 mm
Serrated Head Screws
and Flat Washer (3 each per blade)
BLADE
Blade Holder
10
Installing the Canopy Housing (continued)
How to Assemble the Blades
x 15
x 15
FLAT WASHER
SERRATED HEAD
SCREWS
HARDWARE USED:
1.
Position the blade over the blade holder with
threaded posts showing. Make sure the bottom edge
of the blade is fully seated against the blade holder.
With a Phillips screwdriver, tighten 3/16
Ý
-24 x 10 mm
serrated head screws and flat washers to secure the
blade to the blade holder. (Figure 18)
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
3/16
Ŋ
-24 x 10 mm
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figrue 17)
Figure 17
Canopy Screw
Cover
Figure 19
HARDWARE USED:
x 10
1/4-20 x 14 mm
SCREWS
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
2.
Secure the blade holders to the bottom of the motor
assembly using the 1/4-20 x 14 mm screws. (Figure 19)
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
Blade Holder
Motor
Assembly
1/4-20 x 14 mm Screws
(2 per assembly)
