Fanimation Evanesce FP2700 Series, Руководство пользователя

Страница: 4 / 16

4
Electrical and Structural Requirements
Wiring and Control Options
Please choose one of the following options and proceed
to the page as indicated.
1. Fan (& optional light) remote control (C24), see page 5.
2. Fan (& optional light) wall control (C25), see page 6.
3. Optional light kit (LK27), see page 10.
2˝ x 4˝
Ceiling
Joists
Ceiling
Outlet
Box
Figure 1
▲ WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
▲ WARNING
Turning off wall switch is not sufficent. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and the
ceiling fan must be properly grounded as a precaution
against possible electrical shock.
If your fan is to replace an existing light fixture, turn
electricity off at the main fuse box at this time and remove
the existing light fixture.
Your new ceiling fan will require a grounded electrical
supply line of 120 volts AC, 60 Hz, 15 amp circuit. The
outlet box must be securely anchored and capable of
withstanding a load of at least 100 lbs.
Figure 1 depicts
different structural configurations that may be used for
mounting the outlet box.
▲ WARNING
To reduce the risk of fire, electrical shock, or personal
injury, mount fan to outlet box marked acceptable for
fan support of 45.36 kg (100 lbs) or less. Use screws
supplied with outlet box. Most outlet boxes commonly
used for support of light fixtures are not acceptable for
fan support and may need to be replaced. Consult a
qualified electrician if in doubt.