10
How to Assemble the Light Kit and Blade
Switch Housing
Assembly
Figure 1
1.
Securely attach the 6-pin switch housing connector
to the wiring harness socket within the adapter
assembly. (Figure 1)
Switch Housing
Assembly
Socket Plate
Assembly
Socket Plate
Assembly
Figure 3
3.
Connect the 2 single pin connector from the socket
plate assembly to 2 single connector from the switch
housing assembly. (Figure 3)
4.
Remove the one of three screws in the shade
assembly. Slightly loosen the remaining two screws.
Assemble the socket plate assembly to the shade
assembly using the two key slots in socket plate
assembly. Replace the third screw and securely
tighten all three screws. (Figure 4)
2.
Remove the one of three screws in the switch
housing assembly. Slightly loosen the remaining two
screws. Assemble the shade assembly to the switch
housing assembly using the two key slots in shade
assembly. Replace the third screw and securely
tighten all three screws. (Figure 2)
Switch Housing
Shade Assembly
Assembly
Figure 2
Figure 4
Shade
Assembly
