Floor
Ceiling
Net Hanging Weight: 47 lbs
6½
˝
dia
14° Blade
Pitch
11½
˝
56
˝
Blade Sweep
24
˝
Dimensions shown in inches
7´ min
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
Product Speci
fi
cations subject to change
The
Bayhill
™
Collection Series Fans
Copyright 2008 Fanimation, Inc.
2008/06
SPECIFICATION SHEET
Lauren Brooks™ & Lauren Brooks Collection™ are trademarks of Lauren Brooks, Inc.
CEILING FANS
by FANIMATION
®
LB270VZ Fan Assembly
Fan Assembly Includes:
• Fan Motor Assembly with
Decorative Housing and
Canopy
• Cairo Purple Wood Blades
• Filigree Glass Bowl Light Kit
Assembly with Tassel
14
˝
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.
FAN SPEEDS:
4-speeds, reverse switch (on switch cup housing): High – 170 rpm; Med-High – 113 rpm; Med – 78 rpm; Low – 42 rpm
CONTROL OPTIONS:
The 3-wire wall control (C27) is included. Wall control unit will consist of 4 separate speeds, in
fi
nitely varying down light
controls. Optional C4 remote control with canopy receiver is available. Installation and operating instructions provided
with the control.
LIGHTING OPTIONS:
The down light kit assembly is included with this fan. Maximum of 120 watts (three 40-watt, candelabra bulbs - not
included).
DOWNROD OPTIONS:
This fan comes with a standard 6
˝
x1
˝
downrod. Optional downrods are available in 12
˝
, 18
˝
, 24
˝
, 36
˝
, 48
˝
, 60
˝
, and 72
˝
.
The fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer than
the standard 6
˝
downrod. Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°. Call tech support for
more information.
BLADE SETS:
Four Cairo Purple wood blades blades and blade holders are included with this fan. Not recommended for Damp
Location.
DAMP LOCATION:
Fan assembly not rated for Damp Location usage.
