16
LKLB270VZ Ceiling Fan Light Kit Installation Instructions
READ AND SAVE THESE INSTRUCTIONS
Weight: 7.75 lbs (3.52 kgs)
2. Assemble light kit and switch cup housing
with lockwasher and nut provided.
1. Remove threaded plug from switch cup
housing.
3. Connect white-to-white and blue-to-black
wires.
5. Install 3 candelabra bulbs (not included
- 40 watts max) in each of the sockets.
4. Assemble switch cup housing/light kit
assembly with original screws.
NOTE: Ceiling fan light kits are only meant to be used with ceiling fans. Do NOT install as a light fixture.
WARNING:
To reduce the risk of fire or electric shock, do not use this fan/light kit with any solid-state speed control device.
CAUTION
Turning off wall switch is not sufficient. To reduce the
risk of fire and electrical shock, be sure electricity is
turned off at the main fuse box to the fan before installing
the light kit.
7. Assemble glass frame with tassel fob
provided, do not over-tighten.
6. Assemble glass bowl with rubber washer/
knurled nut provided, do not over-tighten.
▲
WARNING
To avoid possible fire or shock, make sure that the electrical wires are completely inside the fan
housing and not pinched between the switch cup housing and the switch cup
fl
ange.
