Fanelite FS-40RC, Руководство пользователя

Страница: 15 / 18

15
Insert a battery AAA into the remote control (see section REPLACING THE BATTERY for
more information).
Plug in the power cord.
Using the control panel or remote control :
Power ON and speed setting
Press the ON/SPEED button to turn on the fan. Press again to adjust the speed. The
corresponding indicator light on on the fan.
Indicator L : low speed
Indicator M : medium speed
Indicator H : high speed
Oscillation
Press the OSC button to activate the oscillation. Press again to deactivate the oscillation.
Timer
You can set the timer by pressing the TIMER button so that the fan turns off automatically
after the selected time has been reached.
Press the TIMER button to set the timer, up to 7.5 hours.
Each time the button is pressed the timer increases by 30 minutes and the corresponding
LEDs on the control panel will light up, indicating the selected time.
To deactivate the timer press the button until all LED light off.
Mode
Press the MODE button to change the wind mode, the LED corresponding to the selected
mode lights up.
Normal mode (NORMAL) : the fan operates normally according to the selected speed.
Natural mode (NATURAL) : the fan reproduces the effect of the wind by operating alternately
at different speeds and intermittences : low, medium and strong effects of natural wind.
Sleep mode (SLEEP) : When you fall asleep, the body temperature decreases gently. This
means that you are less and less in need of the fan as time goes by while you sleep. If you
select this mode, the fan will reduce its speed and reproduce the effect of the natural wind in
different ways depending on the selected speed. The night mode is ideal in case of
sensitivity to colds.
Power OFF
Press the OFF button to turn off the fan.
Pitch angle
You can adjust the angle of the head manually by moving the fan head
vertically. Simply raise or lower the fan head manually to the desired
position.
WARNING : Only do so when the fan is off and the plug is
disconnected from the mains. Never force to avoid damaging the
appliance.