background image

- 1 -

WZE-3

Electric energy meter,

3-phase

MID Directive  

2014/32/EU

Certificate number 

0120/SGS/0169

The WZE-3 is a static (electronic) calibrated electricity meter of 

three-phase alternating current in a direct system.

A special electronic system under the influence of current flow 

and applied voltage in each phase, generates pulses in propor-

tion to the electricity consumed in this phase. Phase energy con-

sumption is indicated by flashing the corresponding LED (A, B, 

C). The sum of the pulses of the three phases is indicated by a 

flashing LED shall be converted to energy, taken throughout the 

three-phase system, and its value is determined by the segment 

LCD display. 

Decimal represent the hundredths (0.01 kWh = 10 Wh).

Compliance

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Содержание WZE-3









Отзывы: