Fancy Kitty Tumbler Assembly & Use Instructions
Please read all instructions before assembly. If you have questions please feel free to call us at
660-379-2323 Monday thru Friday during normal business hours.
TOOLS YOU
WILL NEED
FOR
ASSEMBLY:
Flat head &
Phillips Head
Screw Drivers
3/4” & 1/2”
wrench or
adjustable wrench
hammer
A second person to
help will make
assembly go much
faster and easier.
The wooden parts are labeled with letters and numbers. R= Right hand side, L= Left hand side,
B= Back, F=Front. This is important as each side is made to fit.
The following is a list of the hardware that comes with your Tumbler:
1 AC Adapter
1 Tension Wheel
Assembly
1 roll pin
1 drive belt
1 motor
assembly
1 pulley wheel
1 cap nut
2 bearings
2 hex keys (Allen
wrench)
2 nylon washers
9 small screws
38 large screws
(if leg assembly purchased
there will be an additional
16 screws)
