Fancom LM.60i, Руководство пользователя

Страница: 13 / 39

LM.60i 4. Mounting
A5911664 - GB 100503 9
4.3. Electrical connections
4.3.1. Introduction
Only apply power after the wiring has been connected correctly.
The actuator must be correctly earthed.
Connect the earth wire on the connection cable to the earth clamp ,
on the inside of the motor housing.
•
Follow all the instructions on the connection diagrams.
•
Use the correct wiring for the correct connections.
•
Connect the LM60i to the correct supply voltage.
•
Mount all wiring/cables so they cannot be damaged and can easily
be replaced in the event of a malfunction.
•
If metal cable channels are used, Fancom advises earthing the
channel at Begin and end of the channel, and as often as possible
at other points.
+ Limit the length of the signal cables as much as possible;
Separate heavy current and weak current cables. Crossings are
allowed.
Observe all regulations of the electricity company