Fancom 750 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 61

Fancom 750 Скачать руководство пользователя страница 40

Lumina 750

Classic screens

6.3

Function key 2: Compost/tunnel temp.

2

Ctr.

Readout of the current compost/tunnel temperature control value. At the beginning

of each tunnel phase the control value is automatically set to the measured

compost/tunnel temperature. The Lumina 750 will gradually control the compost/

tunnel temperature towards the end value. The speed of this control is entered at

the adjustment/hour setting.

Meas

Readout of the average compost/tunnel temperature (°C/°F). Faulty sensors and

sensors showing too great a deviation are not used for this calculation.

The Lumina 750 will automatically set sensors showing a temperature,

which differs too much from the previous average (more than the

maximum deviation), to non-active. These sensors will have to be re-

activated manually if they are to be included in the calculation of the

average.
The Lumina 750 will reactivate all non-active sensors when restarting

after an empty phase. If there are only two sensors remaining to calculate

the average temperature, the computer will only de-activate them if they

are faulty.

Ave. compost

Readout of the average compost temperature (°C/°F). Faulty sensors and sensors

showing too great a deviation are not used for this calculation.

Min.

Readout of the lowest measured temperature from sensors included in the

calculation of the average compost temperature.

Max.

Readout of the highest measured temperature from sensors included in the

calculation of the average compost temperature.

Ave tunnel

Readout of the average tunnel temperature (°C/°F). Faulty sensors and sensors

showing too great a deviation are not used for this calculation.

37

«
...
38
39
40
41
42
...
»

Содержание 750






























































Отзывы:

Нет отзывов