background image

Fanaway Industri Installation Instructions 

 

 

13  | 

P a g e  

 

       

 

 

 

Warranty

 

THIS WARRANTY IS VALID IN AUSTRALIA ONLY 

Note: 

Please complete the following details when you have unpacked the product and retain this card with the purchase invoice 

or sales docket. 

 

Warranty 

These products are covered by a Warranty in addition to all rights available to you by statute. The Warranty is for a period 

of twenty four (24) months from the date of purchase, subject to the following conditions. Fanaway undertakes, at its 

option, to repair or replace, free of charge, each product or part thereof subject to the following conditions. The conditions 

abovementioned are: 

 

1. 

That the purchaser carefully follows all instructions provided and complies with electrical wiring regulations; 

2. 

That the purchaser carefully follows the installation instructions provided  in the owner’s handbook relating to the 

proper use and care of the product and does not use the product for any purpose other than the domestic use for 

which it has been designed;   

3. 

That the product was purchased and is installed in Australia; 

4. 

That this Warranty does not extend to: 

A. 

Optional light diffusers 

B. 

Light globes 

C. 

Damage to plastic light dome caused by inappropriate cleaning 

D. 

Damage to surface coatings caused by cleaning or maintenance using inappropriate cleaning products 

E. 

Defects caused by normal wear and tear, accident, negligence, alteration or misuse; 

F. 

A product dismantled, repaired or serviced by any serviceman other than an authorized employee or agent of 

Fanaway 

G. 

Product installed by an unqualified person. Must be a qualified electrician in Australia 

H. 

Damage or defects caused by fans being installed externally.   

(FANS ARE DESIGNED FOR INDOOR USE ONLY). 

5. 

The provisions of this warranty do NOT apply to other Ceiling Fans. 

6. 

The provision of service under this Warranty is limited by the boundary of the nearest service agent’s area. Traveling 

cost incurred for the service outside this area is not covered by this warranty and will incur commercial cost to be 

paid by the customer regulated by the number of kilometers traveled beyond the service area. 

7. 

The cost associated with the hire of extension ladders and scaffolding to service fans installed on ceilings greater 

than 3 meters will not be covered by this warranty. Such costs will be borne by the customer. 

 

In the event of a service being required, please call the Lucci Warranty Service Hotline acting as the service agent for 

Fanaway on 1800 602 243 between 9AM and 5PM (E.S.T) Monday to Friday. Ensure you have the following details on 

hand. If you are unable to establish the date of purchase, or the fault is not covered by this Warranty, or if the product is 

found to be in working order, you will be required to bear all service call charges. 

Содержание INDUSTRI















Отзывы: