- 16 -
D. Replace the Hard Disk Drive of Your POS Terminal
There is a HDD drive slot on the side of the POS terminal.
a.
Remove the back cover of MSR (if installed).
Remove the securing screws and disconnect
the MSR from the POS terminal.
Remove the MSR Module
from the POS Terminal
b.
Remove the securing screw and
pull out the Hard Disk Module.
c.
Install the new Hard Disk Module to the slot
of the POS terminal.
d.
Secure the securing screw back to the
POS terminal.
e.
Remember to re-install the MSR Module
back to the POS terminal
(if-installed previously).
Or install the Protective Cover to the
POS terminal.
Back Cover
of
MSR
Securing
Screws
Hard Disk
Module
Hard Disk
Module
Securing
Screw
Securing
Screw
Hard Disk
Module
(with new HD)
