Famco MONT72 Series, Руководство пользователя

Страница: 73 / 113

Chapter 6 Function Introduction Shenzhen Hpmont Technology Co., Ltd.
- 64 - MONT72 Series User Manual V1.0
Ref. Code Function Description Setting Range [Default]
F12.21 Output terminal logic setting 00 - 0x3F [0]
Defines that each bit (binary) represents different physical sources.
• 0: Positive logic.
• When output terminals are connected to corresponding common port, this logic is enabled. Otherwise
the logic is disabled.
•
1: Negative logic.
• When output terminals are connected to corresponding common port, this logic is disabled. Otherwise
the logic is enabled.
Ten Unit
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
- - Y4 Y3 Y2 Y1 DO2 DO1
123
6.2.14 F13: Analogue I/O Terminal Parameters
Ref. Code Function Description Setting Range [Default]
F13.00 AI1 terminal function 0 - 2 [0]
0: No function.
1: Speed is given.
2: Motor overheat signal input.
F13.01 AI1 bias 0.0 - 100.0 [0.0%]
F13.02 AI1 gain 0.00 - 10.00 [1.00]
F13.03 AI1 filter time 0.01 - 10.00 [0.05s]
When select AI1 as open-loop frequency setting source, the relationship between the analogue input and
the analogue value after calculating is shown as figure:
•
The formula is: Analogue value after calculating = Gain × Analogue actual value + Bias
•
Here: Y is the analog after the operation, X is the value before the adjustment, k is F13.02, and b is
F13.01.
• F13.06 defines the channel filtering time to filter the input signal.
•
The longer filter time is, the higher immunity level is, the response time is prolonged.
• The shorter filter time is, the quicker response time is, the lower the immunity level is.
Analogue
actual value
Analogue
input filtering
Analogue input gain
Analogue input bias
Analogue value
after calculating