FALMEC ER-1140, Руководство пользователя, Страница: 24 / 38

PART 1: HOOD INSTALLATION GUIDE - WALL HUNG
B
C
V2 (x2)
1
4
ø 8 mm
V1 (x2)
2
3
STEP 7 :
Insert the flue extension into the main flue cover. F asten to the hood body using the screws provided (V5) . Slide the
extension until it reaches the desired height.
STEP 8
:
Place the white flue bracket on the wall, verify the horizontal alignment with a spirit level and mark the 2 drilling points at
the ends.
STEP 9
:
Drill, insert 2 ø 6 mm expansion plugs and fasten bracket with the relative screws (V4).
STEP 10 :
Connect the hood outlet to the 200 mm Flexi ducting leading to the in-roof or external motor.
STEP 11 :
Fasten the flue extension to the bracket using the two flat head screws provided.
STEP 1 2 :
Attach the male plug of the rangehood unit to mains power supply. Note to Electricians: Standard 10 Amp General Power
Outlet (GPO) required. Position GPO as close to the hood unit as possible.
STEP 1 3 :
Connect the female power socket of the rangehood to the male plug from the remote motor.
5
6