Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
FM1301_RC-2L_eng
D)
Warning:
RC-2L
- Wireless Remote Control
(For TF-L Professional Flash)
Instruction Manual
1. Read the Instruction Manual carefully before usage.
2. To prolong lifespan of the device, avoid violent crashing or vibrations to the flash.
3. Repair the device only by professionals and do not open the unit yourself.
4. Use the device in clean and dry environments. Do not use it in humid or dusty
environments. Keep the device away from explosive or corrosive gases.
5. Switch off the remote after use. As setting up of the remote is completed, it can
be switched off until settings need to be changed.
6. Store the remote in a place where children cannot reach to prevent any damages
of the remote.
-
Adjust the flash and modeling lamp power
By pressing the key "Enter", you can select flash or modeling lamp, then simply
use the “+” “-“buttons to regulate.
-Signal confirmation “Emission” button
Once you have done setting up with the RC-2L, press the key "Emission" to send
the signals to the flash units.
-Test button "Test":
Click test button "Test" to check if the flash unit is in a normal working status.
Power adjustment button "Power":
- Pressing the "POWER" button can bring the flash unit into hibernation.
3
(TF-L Series Remote Control Studio Flash)
