15
UPS Monitoring
Comprehensive View
This page gives a snapshot of all the principal UPS parameters. This page will refresh
automatically.
UPS Status
Current state of the UPS is displayed. UPS Status included "Other", "Stand-by", "On-Line", "On
Bypass", "On Battery", "On Booster", "On Reducer", "UPS Testing", "On Mains" and "UPS Off".
Input Frequency
This shows the current input frequency in Hertz at the time of recording.
Output Load
This shows the current load on the UPS in terms of percentage.
Battery Capacity Remaining
The remaining battery capacity expressed in percent of full capacity.
Current Battery Voltage
The current battery voltage expressed in Volts.
UPS Temperature
This shows the current temperature of the UPS battery in
o
C.
USHA System Date
The date set on USHA in dd/mm/yyyy format (eg. 27/02/2000).
USHA System Time
The time set on USHA in hh:mm:ss 24-hour format. (eg. 8:30 p.m. equal 20:30:00).
EMD Temperature
This shows the current temperature measurement of the EMD.
EMD Humidity
This shows the current humidity measurement of the EMD.
EMD Alarm
This shows the current status (alarm or normal) detected from the sensor which attached to the
EMD.
