Falcon Elite 110 Dual Fuel Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 40

Falcon Elite 110 Dual Fuel Скачать руководство пользователя страница 28

28

INSTALLATION

Check the ap pli ance is electrically safe and gas sound when you have fi nished.

Unpacking the Cooker

Do not take any packaging off the cooker until it is
directly in front of the place it is to be installed (unless
it will not fi t through a door in its outer packaging).
Cut the banding straps and lift the cardboard box off
the cooker, LEAVING THE COOKER STANDING ON THE
BASE PACKAGING. See the loose unpacking sheet.

Moving the Cooker

The cooker is very heavy. Take great care.
We recommend two people manoeuvre the cooker.
Ensure that the fl oor covering is fi rmly fi xed, or
removed to prevent it being disturbed when moving
the cooker around. You will need the levelling tool.

From the back tilt the cooker forward and remove the
rear half of the polystyrene base pack.

Repeat from the front and remove the front half of the
poly base. Pull the drawer out to its furthest point.

Lift up the ends of the plastic clips (one each side)
to release the catches holding the drawer to the side
runners and at the same time pull the drawer forward
and away from the side runners. For safety’s sake push
the drawer runners back out of the way. Put the drawer

some where safe - do not refi t it until the installation is
complete.

Lower the Rollers.

Fit the Allen key tool to the centre roller lowering
mechanism (C in the fi g. below).

A left rear roller, B right rear roller, C centre roller

LOWER THE FRONT ROLLER by doing 14 complete
(360°) turns clockwise.

Now LOWER THE TWO REAR ROLLERS.

First fi t the levelling tool on the hexagonal adjusting
nut as shown below.

Make 10 complete (360°) turns clockwise. (This means
turning and removing the levelling tool 20 times).

Make sure you lower BOTH REAR ROLLERS. There are
two adjusting nuts, one for each roller, at both the front
bottom corners of the cooker.

Unfold the rear edge of pack base tray. Carefully push
the cooker backwards into position. Take care not to
damage the power cable. Push the cooker close to its
fi nal position, leaving just enough space to get behind
it.

«
...
26
27
28
29
30
...
»

Содержание Elite 110 Dual Fuel









































Отзывы:

Нет отзывов