Falcon 900S Induction G5, Руководство пользователя и инструкции по установке, Страница: 27 / 36

INSTALLATION
Check the appliance is electrically safe when you have finished.
23
Cooker
Outer stability
bracket
Floor
Wall
3 mm min
Typical wall mounting
ArtNo.070-0014 - Stability bracket - Wall fitting
Cooker
Stability bracket
Floor
3 mm min
Typical floor mounting
Levelling
You are recommended to use a spirit level on a shelf in the
oven to check for level.
Place the cooker in its intended position taking care not to
twist it within the gap between the kitchen units as damage
may occur to the cooker or the units.
The front feet and rear rollers can be adjusted to level the
cooker.
To adjust the height of the rear of the cooker, turn the
adjusting nuts at the front bottom corners of the cooker.
To set the front feet turn the bases to raise or lower.
Fitting the Stability Bracket
A suitable stability device is shown in Fig.7-8 and Fig.7-9 .
When using a stability bracket ( Fig.7-8 and Fig.7-9 ), then
adjust the bracket to give the smallest practicable clearance
between the bracket and the engagement slot in the rear of
the cooker.
Fit the bracket so that it engages as far as possible over the
chassis of the cooker.
Fig.7-8
Fig.7-9