10
283912_BA_FALCON_Kleinteilereiniger_
Operating-instr_002_INT_.docx
05/2024
Operation
•
Open the lid of the container and fill in the appropriate amount of cleaning
liquid (solvent) (see section on "Technical data")
•
2-litre & 4-litre version
o
Immerse the workpiece in the cleaning liquid and clean it with a suitable
brush or cloth.
•
2-litre & 4-litre version vwith spring-loaded immersion sieve
o
Place the workpiece on the sieve bottom and immerse everything
together in the cleaning liquid.
o
If necessary, clean with a suitable brush or cloth.
•
8-litre version
o
Immerse the workpiece in the cleaning liquid and clean it with a suitable
brush or cloth.
o
Provide the parts basket (optional) with workpiece and lower it into the
cleaning liquid. Let it soak in. If necessary, clean with a suitable brush
or cloth. Hang the parts basket in the holder to dry the workpieces.
•
Close the lid again.
•
NOTICE
The filling quantity of the cleaning liquid also depends on the workpieces to be
immersed.
Overflow must always be prevented.
Operating temperature range:
5°C to 40°C
Max. temperature of the cleaning liquid
50°C
If equipotential bonding is required, use the earthing cable with Quick-Connector
(Item No. 283933), which is available as an accessory.
Push it onto the ground pin as far as it will go.
Then use the clamp to attach the earthing cable to the object intended for
equipotential bonding.
Disposal
•
Thoroughly clean the container before disposal.
•
When disposing of any waste materials follow local legislation. This will make
a valuable contribution to environmental protection.