I65/I56I HARDWARE DESCRIPTION VERSION
1.00
6 EMC and ESD requirements
The
ETS 300342-1
standard applies to the I56/I56i with regard to EMC and
ESD requirements.
Additional requirements in relation to EMC/ESD:
If the I56/I56i is being used in cars, the requirements regarding power
supply as defined in section 9.6 of the ETS 300342-1 (6/97) standard must
be fulfilled.
The connecting cable between the chip card reader and the socket on the
I56/I56i must be shielded in compliance with EMC requirements.
When using the I56/I56i cellular engine with individual handsfree
equipment, noise interference may occur.
The I56/I56i cellular engine must be connected directly to the ground of the
base device.
Note:
The device should only be handled in compliance with ESD
regulations (grounded, ESD chain, trained personnel).
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 53
