Falco FAL70GW, Инструкция по эксплуатации

Страница: 10 / 12

9
2.1 Glass fitting and light replacing
o
Prior to touching the light bulbs ensure they are cooled down.
o
First unscrew the 4 screws securing the glass panel on the side
of the appliance where you are changing the bulb.
o
Disconnect the light wiring connection point and push/pull the
light out of the light fitting.
o
Fit the replacement bulbs, bulb holders and wiring in the same
manner as the originals.
o
Reconnect the light wiring connection point.
o
IMPORTANT: Defective bulbs should be replaced
immediately.
o
If the light or lights still do not work, make sure that the lamps
are fitted properly into their housings before you call for
technical assistance.
o
Refit the glass to the appliance.