7
Note:
●
Any installation work must be carried out by a qualified electrician or
com petent person.
●
Do not connect the ducting system of the hood to any existing ventilation
system which is being used for any other appliance ,such as warmer tube, gas
tu be , hot wind tube.
●
The angle of the bend of the ventilation pipe should not be less than 120
º
;
you must direct the pipe horizontally, or, alternatively, the pipe should go up
from the initial point and should be led to an outer wall.
●
After the installation ,make sure that the cooker hood is level to avoid grease
colle ction at on end.See Pic. 5
To use your cooker hood:
LED touch control: