17
Change the LED light
1. Switch off the appliance and unplug it.
2. Unscrew the 2 pcs ST4*8mm big flat tapping screws on the lamp plate unit by
screwdriver.
3. Pull out the terminal, and take down the lamp plate unit.
4. Unscrew the 4 pcs ST4*8mm big flat tapping screws on the lamp plate unit and
replace the light
5. Apply reverse procedure of the above to assemble LED light and lamp plate
unit.See pic below.
•
ILCOS D code for this lamp is: DSL-5-S-450
– Max wattage: 5W
– Voltage range: DC 12V
ENVIRONMENTAL PROTECTION:
This product is marked with the symbol on the selective sorting of
waste electronic equipment. This means that this product must not
be disposed of with household waste but must be supported by a
system of selective collection in accordance with Directive
2012/19/EU. It will then be recycled or dismantled to minimize
impacts on the environment, electrical and electronic products are
potentially dangerous for the environment and human health due to
the presence of hazardous substances.For more information, please
contact your local or regional authorities.
NOTE:
The following shows how to reduce total environmental impact (e.g. energy use) of the
cooking process).
(1) Install the cooker hood in a proper place where there is efficient ventilation.
(2) Clean the cooker hood regularly so as not to block the airway.
(3) Remember to switch off the cooker hood light after cooking.
(4) Remember to switch off the cooker hood after cooking.