fakro ZWG3, Руководство пользователя

Страница: 4 / 16

3. Controller programming
In order to operate FAKRO electronic accessories, featuring Z-Wave system, by means of the
ZWG3 controller, it is necessary to:
1. Add the device to the “Z-Wave” network (INCLUDE function) – see section 3.1
and
2. Associate the device with a selected pair of buttons on the controller with which user wishes to operate
the device (ASSOCIATE function) – see section 3.2.
In one “Z-Wave” network, there can be included a maximum of 232 devices, i.e. controllers, electronic
accessories for FAKRO roof windows as well as other electronic devices.
Caution!!!
Every device physically removed from the network (e.g. in case of damaged) needs to be deleted
from the network (Sec. 3.4) so as to ensure the optimum communication between devices. Disconnecting a
device without deleting it from the controllers' memory will result in prolonged reaction time to the commands
sent and accelerated running down the batteries of the controller. If it becomes necessary to remove a damaged
device whose deleting from the memory is impossible, it is advisable to reconfigure the whole network (all
devices). When relocating a device within the network (e.g. socket module) it is recommended to delete it first
from the network and then, after installing it in a new work place, repeat adding procedure.
11.09.21 NC826 4/16 ©2011, FAKRO