ASSEMBLY
GB
22
Assembly of blades
and grilles
1. Remove and discard the plastic sleeve on the motor shaft.
Position the back grille against the front of the motor housing
through the motor shaft. Ensure that the handle at the back
of grille is facing up and that all guiding pegs on the motor
housing are lined up with cutouts on the rear grille.
2. Secure the back grille into place with the fastener. Fasten
the fastener firmly onto the motor housing by tightening it in
a clockwise direction.
3. Install the fan blades onto the motor shaft with the cutouts
fitted.
4. Place fastener on the motor shaft after blades.
5. Fasten into place by tightening the fastener counter
clockwise direction.
6. Attach the front grille to rear grille, fastening it with the
clamping ring by using a screwdriver and tighten to screw to
secure it.
5. Check the correct rotation of the blades.
