AGY-020 Installation Guide
MAN-AGY-003
Power Supply (AGY-020)
AGY-020 is a dedicated mains power supply for the agility soft start. In addition to allowing for mains
control voltage operation, the power supply also allows for mains voltage digital control (D1/D2).
Fitting
Ensure terminals 24V, 0V, COM, D1 and D2 are fully open before installing power supply as
shown below:
Fit screw and nylon washer
(supplied). DO NOT overtighten
(Max 40 cNm)
Tighten terminals 24V, 0V, COM, D1 and D2
When the AGY-020 installation is complete, control supply, D1 and D2 are provided on the
power supply rather than the agility main unit