Fair-Play SP-70, Руководство пользователя, Страница: 59 / 71

Chapter 8: System Settings
53
MP-69 data output
Your Fair-Play scoreboard requires data in one of two formats: MP-70 or
MP-69. The table on
“B
OARDS
S
UPPORTED
”
ON PAGE
55
indicates which data
format your scoreboard model requires. Selection of the proper data for-
mat is especially important if your SP-70 control is wired from the back
panel SCOREBOARD output connectors 1 & 2 directly to the scoreboard
through conventional data cable.
More clearly stated, if you are trying to run TeleLite model panels, such as
would be found on a BB-6660 scoreboard, select the MP-69 data format.
For the newer technology scoreboards, such as the BB-1625, select the
MP-70 data format.
The SP-70 can provide data in either format. The prompt shown below
allows you to specify which data format the controller provides.
To select the MP-69 format respond with
YES
, and respond with
NO
to
select the MP-70 format.
Note: The MP-69 prompt will not appear if your SP-70 con-
trol is configured for wireless operation. If you have an SP-
70 with the wireless option, your control has already been
pre-configured to operate with MP-70 data.