Fagor W Series, Общие инструкции по установке, использованию и обслуживанию

Страница: 21 / 32

21
8.7 Electric rinse aid dispenser (COP MODELS)
Installation: Take the tube located in the back or your machine
marked “Rinse Aid” and place inside
rinse container.
Tubes are transparent to provide you visible mean that chemicals are being dispensed.
Operation: this dispenser absorbs the rinse aid when the rinse pump is switched on. That is, when
the machine is filling and when the machine is running the rinse cycle.
Adjustment: The dispenser should be adjusted when the machine is installed to ensure that the wash
is optimised from the start. The setting should be adjusted according to the type of rinse aid and the
water hardness.
Regulation
In order to maintain dishwasher at optimum conditions, it is requested to remove lime and corrosion
deposits on a frequent basis. A de-liming solution should be available from your chemical supplier.
Read and follow all instructions on the label of the de-liming solution. Operations:
•
Fill the machine. Add the correct amount of de-liming solutions as recommended by the de-
liming solution manufacturer. The water capacity of the tank can be verified on the specification
sheet of this manual.
•
Remove detergent and rinsing tubes from containers so no chemicals go to the machine.
•
Run the machine for the recommended period of time. As many cycles as needed.
•
Turn off the machine and open the door.
•
When clean, drain and re-fill the machine.
•
Run machine for 3-4 cycles to remove de-liming solution.
•
Drain the machine.
Filter
Rinse Aid
Rinse Line
Regulation
Filter
Rinse Aid
Rinse Line
Water Valve
Electrical Connection