Fagor V28F013W3, Инструкция по установке и эксплуатации

Страница: 54 / 100

DOOR
An information template is
provided with the
assembly instructions.
Position the template, fix
it in place and mark the
position of the holes.
Drill the holes with a Ø 2.5
mm bit and screw the
supports to the panel with
the curved part facing
downwards.
Pick up the door panel and
fit the supports into the door
housing. Pull it downwards,
ensuring it is firmly fixed and
levelled with the top part of
the door.
Open the dishwasher door
slowly, holding the panel in
place, and then fix it with the
screws, ensuring the panel
is correctly aligned with the
door.
If the door springs are not
strong enough,
compensate the door with
the two additional screws
provided in the
accessories bag.
Fit the dishwasher into the
space. Adjust it to the
worktop until the top of
the dishwasher makes
contact with the bottom
of the kitchen fitting.
Fit the plinth in place,
sawing it to obtain the
desired measurement.
Fix the dishwasher to the
worktop, in the case of a
wooden worktop. If it is a
granite worktop, fix the
dishwasher to the
adjoining fittings.
f
The maximum and minimum recommended weights for the
door panel to be placed on the dishwasher are:Maximum:
6.5 kg. Minimum: 3 kg.
I M P O R TA N T
i
j
k
l
A space of at least two millimetres must be left at the
sides between the kitchen fittings or electrical appliances
and the dishwasher.
I M P O R TA N T
h
g
f
g
h
An information template is
provided with the assembly
instructions.
l k
j
i