48
Rev 0.0
USER INSTRUCTIONS
EN
Prolonged non-use recommendations
Run the soak program
•
twice
in succession.
Unplug the power
•
cord from the socket.
Leave
•
the door slightly open
in order to prevent the formation of unpleas-
ant odors inside the washing tank.
Fill the rinse-aid dispenser
•
.
Shut off the water supply tap
•
.
Before starting the dishwasher after prolonged non-use
Check that there are no deposits of sludge or rust inside the water pipe: if
•
there are, allow the water to run from the water supply tap for a few min-
utes.
Plug the power cord
•
back into the socket.
Reconnect the water intake hose and open the tap again
•
.
9.6
Troubleshooting minor problems
In some cases it is possible to remedy minor problems by referring to the fol-
lowing instructions:
If the program fails to start, check that:
the dishwasher is connected to the electrical power supply;
•
there is no power failure;
•
the water tap is open;
•
the dishwasher door is properly closed.
•
If water remains inside the dishwasher, check that:
the drain hose is not kinked
•
the drain siphon is not obstructed;
•
the dishwasher fi lters are not clogged.
•
If the dishes do not come out clean, check that:
the correct amount of detergent has been added;
•
there is regenerating salt inside the special container;
•
the dishes are being loaded correctly;
•
the selected program is suitable for the dish types and their degree of soil;
•
all the fi lters are clean and positioned correctly;
•
the spray arm nozzles are not obstructed;
•
there is no object obstructing the rotation of the spray arms.
•
