Fagor LF73DWITU, Инструкция по установке и эксплуатации

Страница: 12 / 28

When do I need to add rinse-aid?
The dishwasher itself will inform you of
when the rinse aid needs refilling.
A pilot light on the design panel will
come on when a refill is necessary.
PILOT LIGHT
The rinse-aid helps drying and
prevents drops of water from clinging
to utensils after washing. The rinse-aid
container is located on the inside of
the door, next to the detergent
container.
It has a 4-position dispenser for
adjusting the amount of rinse-aid to
the water quality (the dispenser is set
at position 2 at the factory).
If you notice drops of water on utensils,
increase the position of the rinse-aid
dispenser. If the utensils have white or
sticky lines, lower the position.
RINSE-AID CONTAINER DISPENSER
a
Once the level of the
dispenser has been
set, fill the container
to the top, but do not
overfill it. If this
occurs, clean the
spillage with a cloth.
a
A greater amount of rinse-aid does
not necessarily mean better
results. In fact, too much rinse-aid
can lead to water marks.
I M P O R T A N T
When do I need to add salt?
A pilot light will come on to show when
more salt needs to be added.
PILOT LIGHT
Important:
If your dishwasher does not
have a display or pilot light, you should
periodically refill the salt that has been
used (about every 20 washes for
medium-hard water).
You should not use salt if your
dishwasher does not need it. In
this case, the pilot light will remain
on at all times.
I M P O R T A N T
When the salt container needs filling,
you should always do it before a wash
and not afterwards.
d c
Stir with a spoon.
Close the lid tight and clean the salt
around the container.
c
d