DOOR
An information template
is provided with the
assembly instructions.
Position the template, fix
it in place and mark the
position of the holes.
Drill the holes with a Ø
2.5 mm bit and screw the
supports to the panel with
the curved part facing
downwards.
Pick up the door panel and
fit the supports into the door
housing. Pull it downwards,
ensuring it is firmly fixed
and levelled with the top
part of the door.
Open the dishwasher door
slowly, holding the panel in
place, and then fix it with
the screws, ensuring the
panel is correctly aligned
with the door.
If the door springs are not
strong enough,
compensate the door
with the two additional
screws provided in the
accessories bag.
Fit the dishwasher into
the space. Adjust it to the
worktop until the top of
the dishwasher makes
contact with the bottom
of the kitchen fitting.
Fit the plinth in place,
sawing it to obtain the
desired measurement.
Fix the dishwasher to the
worktop, in the case of a
wooden worktop. If it is a
granite worktop, fix the
dishwasher to the
adjoining fittings.
f
The maximum and minimum recommended weights for
the door panel to be placed on the dishwasher
are:Maximum: 6.5 kg. Minimum: 3 kg.
I M P O R T A N T
i
j
k
l
A space of at least two millimetres must be left at the
sides between the kitchen fittings or electrical appliances
and the dishwasher.
I M P O R T A N T
h
g
f
g
h
An information template is
provided with the assembly
instructions.
l
k
j
i
