Fagor FXM1 Series, Руководство по установке

Страница: 35 / 174

2
Ref.2105
· 35 ·
FXM|FKM
SERVOMOTOR
3-PHASE
SERVOMOTORS. FXM
2.1 Description
FAGOR FXM servomotors are synchronous AC brushless with permanent
magnets. They are especially designed to be used with FAGOR drives.
They are ideal for controlling feed and positioning axes in machine tool
applications as well as handling systems, textile machinery, printers,
robotics, etc. In general, they are ideal for any application requiring great
positioning accuracy.
These characteristics are essential to many applications such as coil
feeders, punch presses, etc.
In these three-phase servomotors heat is only generated in the stator and
may be dissipated through the armature. Thanks to this they can meet the
IP 65 protection standard and are not affected by liquids or dirt.
They incorporate a temperature sensor for monitoring the internal
temperature. See section,
2.3 Temperature sensor of this chapter.
These servomotors have an encoder as position feedback and optionally
an holding brake.
The family of non-ventilated FXM servomotors, available both for 220 Vac
(F winding) and 400 Vac (A winding) offers four series of different sizes.
These series are:
The family of ventilated FXM servomotors, only available for 400 Vac (A
winding) offers two series of different sizes. These series are:
All these servomotors have been manufactured according to the
standards EN 60204-1 and EN 60034 in compliance with the European
Directive 2006/42/EC on machine safety.
Its features are:
 Wide range of rated power from 0.5 kW to 24 kW and rated speed
from 1200 rev/min to 4000 rev/min.
 Uniform output torque.
 High torque/volume ratio.
 High reliability.
 Low maintenance.
FXM1 FXM3 FXM5 FXM7
FXM5/V FXM7/V