Fagor FXM1 Series, Руководство по установке

Страница: 27 / 174

   General concepts
GENERAL CONC
E
PTS
In
sta
llatio
n
1.
Ref.2105
· 27 ·
FXM|FKM
SERVOMOTOR
Cabling
Power cable
FAGOR supplies the cable to supply the electric power to FXM/FKM
servomotors through three phases with ground connection and overall
shield. It will also have two more wires, of a smaller section, if the
servomotors have the brake option.
Section
The attached table shows the EN 60204-1 standard applicable to servo
drive system installations. It determines the section through which the
maximum current allowed in continuous duty can circulate on three-phase
wires confined in PVC hose or installed on the machine through conduits
or channels. The ambient temperature is assumed to be 40°C/104°F.
To determine the cable needed to connect the motor to the drive, take into
account the motor/power-cable assignments given in the corresponding
tables. See section,
Assignment .
Sales reference
The sales reference of the power cable has the following format of letters
and digits. It specifies the whole range of power cables offered in the
catalog of FAGOR.
T- 1/10 Cable section / Imax. current.
SECTION IMAX. SECTION IMAX.
mm² A mm² A
1.5 13.1 25 70
2.5 17.4 35 86
4 23 50 103
6 30 70 130
10 40 95 156
16 54 120 179
F- 1/11
Sales reference of the power cable.
MPC-4x

-

M to connect motors without holding brake
MPC-4x

+(2x

)-

M
to connect motors with holding brake
T- 1/11 Range of power cables ·without holding brake at the motor·.
MPC-4x1.5-  M MPC-4x4-  M MPC-4x10-  M
MPC-4x2.5-

M MPC-4x6-

M MPC-4x16-

M
T- 1/12 Range of power cables ·with holding brake at the motor·.
MPC-4x1.5+(2x1)-

M MPC-4x6+(2x1)-

M MPC-4x25+(2x1)-

M
MPC-4x2.5+(2x1)-

M MPC-4x10+(2x1)-

M MPC-4x35+(2x1)-

M
MPC-4x4+(2x1)-

M MPC-4x16+(2x1.5)-

M MPC-4x50+(2x1.5)-

M
INFORMATION.
The user must indicate the length of each of these cables when placing
the order. Always in meters.
i