Fagor FXM1 Series, Руководство по установке

Страница: 123 / 174

   3-phase servomotors. FKM
3-
PHASE SERVOM
O
TORS. FKM
Co
nne
ctio
ns
3.
Ref.2105
· 123 ·
FXM|FKM
SERVOMOTOR
FKM8/8V/9 series
The power connection of the servomotor is made through a straight mail
base connector that ensures a sealing degree of IP 67 when locked.
All models of these servomotor series have the same power base
connector, MC-61/6.
Once the power cable has been assembled, it is connected by screwing
the female connector
MC-61/6 of the power cable into the power base
connector of the servomotor.
Use the figure to help you and proceed as follows:
Note. For servomotors in these series, FAGOR supplies, upon request,
the MC-61/6 female connector in a plastic bag with 6 pins. Before
connecting it, the user must assemble the power cable mounting this
connector in a 4-wire cable MPC-4x

-

M (if the servomotor does not
have a brake) or a 6-wire cable MPC-4x  +(2x  )-  M (if the servomotor
has a brake). These cables are also supplied by FAGOR (upon request)
in meters.
Assembly instructions for the MC-61/6 connector to the MPC-4x ...
power cable.
F- 3/25
Assembling the MC-61/6 power connector to the MPC-4x-...-

M cable.