Fagor FI - 48 W, Руководство по обслуживанию

Страница: 18 / 52

15
6.3 DETERGENT CONTROL
•
Use Commercial Grade, High Temperature, Low Suds Liquid Detergent . Fagor doesn’t
recommend any specific brand name of chemicals. Contact your local chemical distributor for
questions concerning your chemical needs.
•
All machines come equipped with an internal Detergent and Rinse dispenser.
•
Take the tube located in the back or your machine clearly marked “Detergent” and place inside
detergent container.
•
Take the tube with no markings and place inside rinse container.
•
Tubes are clear to provide you a visible means that chemicals are being dispensed.
•
If desired you can control the amount of Chemical being dispensed by opening the bottom front
panel of the machine. Locate the detergent dispenser (Fig. 9) and regulate according to the flow
chart (Fig. 9a). For the Rinse, turn the button counterclockwise to get more rinse aide and
clockwise for less. You prime the line by pressing the button.
•
Verify all connections to the dispenser are hand tighten to prevent any leaks.
•
Control and maintain the level of detergent and rinse aid of the tanks. Keep pipe and filters
submerged.
Warning!
If you require the installation of an NON FAGOR Detergent and Rinse pump, a
form MUST be fill out prior to installation by your installer. Failure to do so, will
void your Warranty. This form can be located inside your dishwasher. If lost,
please contact Fagor to get a copy.
Oº 220º
1
2
3
4
5
6
7
Fig.9a
Gal./h.
1 0
2 0.06
3 0.20
4 0.40
5 0.53
6 0.66
7 0.80
Detergent Controller
Rinse Controller and
priming button
Fig. 9