Fagor CNC 8070, Конфигурация оборудования

Страница: 198 / 276

Hardware configuration.
CNC 8070
9.
MONITOR-21 MULTITOUCH.
OSD
(On Scre
en Disp
lay) me
nu.
·198·
(R
EF
: 1911)
9.9 OSD (On Screen Display) menu.
The selected values are stored in the memory of the monitor after pressing the [Menu/Sel]
button at the end of the wait time. The saved values are not lost when the monitor is turned
off. However, the selected value will not be available if the monitor is turned off before the
wait time has been completed. The wait time is approximately 5 seconds, and can be
configured from the OSD menu.
9.9.1 Using the rear keyboard with the OSD menu.
The keys on the rear of the monitor have the following functionality when the OSD menu is
active.
Button. Description.
Main OSD menu.
Turns the monitor on and off.
OSD sub-menu.
Turns the monitor on and off.
Main OSD menu.
Exits the OSD menu.
OSD sub-menu.
Returns to the previous menu.
Main OSD menu.
Moves the selector to the left.
OSD sub-menu.
Moves the selector to the left.
Moves the selector up and down.
Increases the value of the selected option.
Main OSD menu.
Moves the selector to the right.
OSD sub-menu.
Moves the selector to the right.
Moves the selector up and down.
Reduces the value of the selected option.
Main OSD menu.
Activates the OSD menu.
OSD sub-menu.
Confirms the selected option.
Main OSD menu.
Changes the video input source.
OSD sub-menu.
Not used.