Fagor CNC 8060, Руководство по установке, Страница: 627 / 698

Installation manual.
CNC 8060
CNC 8065
SUBROUTINES.
14.
Subro
u
tine associ
ate
d
with th
e too
l chang
e (fun
cti
on T).
·627·
(R
EF
: 1709)
14.8 Subroutine associated with the tool change (function T).
The subroutine associated with the tool is executed automatically every time a T function
(tool selection) is executed. If the M06 function is included in this subroutine, the tool loading
process will commence when the "T" code has been executed.
Characteristics of a turret type magazine.
For a turret magazine, it is recommended that the routine associated with T include the M06
function. When the CNC selects a tool, the routine associated with T executes the function
M06 (tool change). If the subroutine associated with T does not include the function M06,
when the CNC selects a tool, it internally executes a T# M6 block to make the change.
14.8.1 Configure the subroutines.
Assign the subroutine to the command.
Name and location of the subroutine.
This subroutine must be defined in the general parameter TOOLSUB and saved in the folder
..\Mtb\Sub. If there are several channels, there may be a different subroutine for each
channel.
Parameter. Meaning.
TOOLSUB CHN Subroutine associated with "T".
[CHN] ....... General machine parameter of the channel.