Fagor 9701, Руководство пользователя

Страница: 38 / 39

3
APPENDIX I
MAINTENANCE
Cleaning:
The accumulated dirt inside the unit may act as a screen preventing the proper dissipation of the
heat generated by the internal circuitry which could result in a harmful overheating of the floppy
disk unit and, consequently, possible malfunctions.
On the other hand, accumulated dirt can sometimes act as an electrical conductor and shortcircuit
the internal circuitry, especially under high humidity conditions.
To clean the operator panel and the monitor, a smooth cloth should be used which has been
dipped into de-ionized water and /or non abrasive dish-washer soap (liquid, never powder) or
75º alcohol.
Do not use highly compressed air to clean the unit because it could generate electrostatic
discharges.
The plastics used on the front panel of the floppy disk unit are resistant to :
1.- Grease and mineral oils
2.- Bases and bleach
3.- Dissolved detergents
4.- Alcohol
Avoid the action of solvents such as Chlorine hydrocarbons , Benzole , Esters
and Ether which can damage the plastics used to make the unit’s front panel.
Preventive Inspection:
If the floppy disk does not turn on when actuating the start-up switch, verify that the fuses are
in good condition and that they are the right ones.
It has two 2Amp./250V fast fuses (F),one per AC mains line.