Fagor 9701, Руководство пользователя

Страница: 32 / 39

Section: Chapter: 4
4
Page
OPERATION WITH 8050 CNC
4.3 MACHINE PARAMETERS FOR THE CNC SERIAL PORTS
These parameters must be set at the CNC in order to work with the floppy disk unit and
are the following:
BAUDRATE (P0)
Indicates the transmission speed (baudrate) used when communicating between the
CNC and the peripheral devices.
It is given in Baud and it is selected according to the following code:
0 = 110 baud
1 = 150 baud
2 = 300 baud
3 = 600 baud
4 = 1200 baud
5 = 2400 baud
6 = 4800 baud
Valid for the floppy disk unit
7 = 9600 baud Valid for the floppy disk unit
8 = 19200 baud Valid for the floppy disk unit
9 = 38400 baud (only when having CPU - Turbo)
10 = reserved
11 = reserved
12 = reserved
When working with the FLOPPY DISK UNIT, this parameter must be set to the same
value as the setting of the FLOPPY DISK UNIT.
NBITSCHR (P1)
Indicates the number of data bits per transmitted character.
0 = The 7 least significant bits are sent out. It is used when transmitting standard
ASCII characters.
1 = All 8 bits are sent out. It is used when transmitting special characters (ASCII
code greater than 127).
When working with the FLOPPY DISK UNIT, this parameter must be set to 1.
PARITY (P2)
Indicates the type of parity check being used.
0 = No parity check is used.
1 = Odd parity.
2 = Even parity.
When working with the FLOPPY DISK UNIT, this parameter must be set to 0.
MACHINE PARAMETERS