DC Servo Drive System Manual Ver: 0009
DC - 8/32
1.6
CHARACTERISTICS PLATE AND SALES REFERENCE
Example of the plate that
comes with each DCM motor.
Sales reference description
for DCM motors
1.7
SERVICE INSTRUCTIONS
The brushes must be checked for the first time after being running for 500 hours and, then, every
1000 hours. One must check the way they sweep, their surface and that of the collector.
The life span of the brushes depend on how they are used and on ambient conditions.
They must be replaced with brushes of same quality and dimensions: 10 mm for the DCM2, and
11 mm for the DCM4 and DCM5.
TYPE: DCM42.20A.E0.000
Permanent Magnet D.C. Servomotor
SN: E190057
Mo 4.4 Nm
Mp 29 Nm
Io: 7.8 A
MAX. RPM: 2000
B.E.M.F.: 118 V
TACHO:
V/KRPM
BRAKE:
V
A
Ip: 52 A
KT: 0.56 Nm/A
Iso.Cl.: F
DC MOTORS
Example
DCM 4 2. 20 A. E0. 0 0 0
DIRECT CURRENT MOTOR
MOTOR SIZE
2
95 mm
4
115 mm
5
153 mm
LENGTH
1, 2, 3 See drawings
MAXIMUM SPEED
12
1200 rpm
30
3000 rpm
20
2000 rpm
40
4000 rpm
25
2500 rpm
WINDING
A
Standard
FEEDBACK
E0
TTL Encoder (standard)
T0
Tacho
F0
Encoder and Tacho (not available)
FLANGE AND SHAFT
0
With keyway (standard)
1
Without keyway
BRAKE OPTION
0
Without brake (standard)
1
With brake (24 Vdc)
POWER CONNECTION
0
Terminal box
1
Power connector (not available)
