15.03.2020
2
Safety Instructions
For safety reasons, it is absolutely necessary to read the entire user's guide and all of the instructions
it contains. If the safety recommendations and instructions in this User Guide are not complied with,
measurement errors or data loss or physical injury or property damage may result.
The FLUO DX is not intrinsically safe. Therefore, the device cannot be used in an environment with
explosive vapors where there is a risk of spark ignition or in an area with strong electromagnetic
fields. It should be protected against chemicals, corrosive vapors, strong mechanical vibrations and
impacts
The FLUO DX is equipped with UV LEDs. Never Ever look directly into the Aperture of the device
while on UV LED is turned on! UV Light might hurt your eyes!
Use the FLUO DX in ambient temperatures between 20°C(68°F) and 25°C (77°F), and do not expose
the device to direct sun light.
The FLUO DX should never be opened as there are no user-serviceable parts inside. Doing so voids
the guarantee. Contact your authorized dealer if repairs are necessary.
To avoid incorrect handling, the FLUO DX should only be used by trained personnel.
Use original PERET spare parts and accessories only.
Use the original packaging exclusively when transporting.
DECLARATION OF CONFORMITY
The undersigned representing the following manufacturer: herewith declares that the product FLUO
DX is in conformity with the provisions of the following CE directives including all applicable
amendments:
77/23/EEC Electrical equipment for use within specified voltage limits.
89/336/EEC Electromagnetic compatibility and the standards and technical specifications referenced
overleaf have been applied.
Konrad Silbernagl,
FAG Graphic Systems SA
