112
select a template group.
Click on
OK
.
The new template will be saved in the template planning.
Create configuration from template
If you want to create a new configuration from a template,
select a machine from the Trendline configuration and
click in the
System
menu on
Create new configuration from template
.
Enter a name to the new configuration and
select a template from a template group.
Click on
OK
.
The new configuration will be set up.
Export/import templates
In the Trendline Software you can export and import templates. Further
information in the chapter "Importing and exporting templates
".
4.7.2 Route planning
After the system structure has been entered into a configuration (or in several
configurations as well), you have the option to group parts of those configurations
into routes using the "Route" function. For example, you could create a route for
each day of the week and measure certain machines only on Mondays. Another
example would be a route for a certain mechanic who performs maintenance only
on a few machines of a configuration.
Should you want to take measurements at a measuring point not contained in the
current route, you can take a free measurement with the Detector. To define the
settings for that, at least one template must have been created
before. In this
template you can set exactly the same properties as in a normal measuring point,
i.e. characteristic values, sensor type, time signals, etc.
Create new route
To create a new route, open the route planning.
Click in the
Planning
menu on
Route
.
144
109